In general, it is not possible to provide a single instruction to solve the problems of banner and flex printing machines, but in some situations, minor daily problems may arise and raise questions for the operator.
The flexi panel is a cube that includes a metal frame, a shield, and a rail, which has special accessories. It is stretched on the flex print shield with belts and clips, and then it is covered with colored or galvanized sheets. The width of this panel is 21 cm.
Flexi material refers to a material that allows light to pass through itself, while a banner does not have this ability and usually light shines on it from the front. In fact, flex is a type of banner, but since vinyl is the most common type of banner for printing, the general public considers vinyl printing to be the same as banner printing.
Mesh is a material that has small holes on it (similar to lace fabric) and is used for special purposes. It is available in two types of adhesives back and normal, and you can see the photo of the adhesive back type at the .bottom of this article, the adhesive back type. It is usually used on glasses
The high visual impact, affordability, flexibility, and ease of installation of banners make them ideal for visual communication, so it's no surprise that banners are at the top of the list of products created by signage and graphics businesses. Because of its large size, banner printing shows defects or low-quality items more. Therefore, before printing, you should know about the factors affecting the quality of banner printing.
One of the attractions of UV printing is that it can be used to print on a wide range of materials and products. Since the ink, glue, or any type of coating in UV printing dries very quickly, it is suitable for many types of printing media; If you can put the desired media in the UV printer, you can print on it.
The conventional methods of T-shirt printing are in several general categories, such as: silk printing, cutting printing, sublimation printing, direct printing on DTG T-shirts, and the newest method used all over the world is the DTF printing method.
One of the most common problems of t-shirt printing by DTF method is usually cracking of the printed photo after printing, which sometimes happens a few days after printing, which causes irreparable damage to t-shirt products.
One of the attractions of UV printing is that it can be used to print on a wide range of materials and products. Since the ink, glue, or any type of coating in UV printing dries very quickly, it is suitable for many types of printing media; If you can put the desired media in the UV printer, you can print on it.
Sublimation paper production starts from ordinary paper but what makes it different is its coating, this coating not only makes the surface of the paper smoother but also contains resin and silicone.
One of the most important printing consumables that has a great impact on the quality of the results is printing ink. There are five main types of printing inks used in large format printing machines, which one is the most suitable choice depends on where the printed result will be used.
The high visual impact, affordability, flexibility, and ease of installation of banners make them ideal for visual communication, so it's no surprise that banners are at the top of the list of products created by signage and graphics businesses. Because of its large size, banner printing shows defects or low-quality items more. Therefore, before printing, you should know about the factors affecting the quality of banner printing.
